Die Change Cart WWF

Front Loader with long Lifting Stroke by Scissors Lift

 

 The Die Change Cart WWF series "Front Loader with long Lifting Stroke by Scissors Lift" pushes the press die to the front, down from its die platform onto the press table. Reverse it pulls the press die from the press table, crossing the front side of the Die Change Cart WWF, onto its platform.

 

The sliding mechanism with which the press die is pushed, usually is driven by hydraulic cylinders. This sliding mechanism is integrated into the die platform of the Die Change Cart WWF.

The Die Change Cart WWF, version "Frontloader with long Lifting Stroke by Scissors Lift" has a hydraulic lifting installation, which lifts the die platform of the die change cart up to the level of the press table. This enables to push the press die onto the press table and revers to pull the press die down from the press table onto the Die Change Cart WWF.

The height of the Die Change Cart WWF standing in position "die platform down" as well as the maximum lifting stroke of the die platform are defined basing on the press table heights of the presses, at which the press dies are foreseen to be changee by the Die Change Cart WWF. In case of several presses this height often is different. In such a case the lifting stroke of the Die Change Cart WWF is defined in such a way that the cart will be fitting to all presses to be considered. On the other hand the lifting stroke also is determined by the height of the press die storage places, onto which the Die Change Cart WWF will have to offload the not needed press dies.

 

The Die Change Cart WWF is much more manoeuvrable than a comparable forklift truck, as it picks up the load between the load wheels of its front legs and the rear steering- and driving wheel, and not in front of the cart. Therefore it does not need any counterweight and therefore it is shorter than a comparable forklift truck.

 

If you are thinking about changing your die change procedure to die change by die change cart, we should exchange corresponding data. Then we will be prepared to provide you with an interesting offer.

If you will have questions regarding our Die Change Carts WWF, we will be at your disposal for clarification of any questions at any time. Please do not hesitate to contact us:

Phone:  +49 2156 419193
Fax:        +49 2156 4979325
Email:    info@seidel-handlingsysteme.de 

 

 

 

large sized_double_decoiler_with_variable_speed_drive electric coil tilting turning table series DWTE Handlingsysteme conventional_line_for_coil_feeding Werkzeugwechsel heavy_load_pallet_transport_carts_type_2 gripper_feed_AV Handlingsysteme industrial_trucks_with_pivot_bearing Werkzeughandling Flow Production Lines Handlingsysteme levellers pedestrian_transport_solution_with_lifting_hydraulics high lift coil transport trucks with carrying bolt